HDMIE50V2 CAT6 Extender 50m 4K with HDMI Loop & IR

HDMIE50V2 CAT6 Extender 50m 4K with HDMI Loop & IR

HDMIE50V2 CAT6 Extender 50m

  Antiference HDMIE50V2 extender set sends full 4K (2160p) or HD (1080p) over a single CAT6 cable to a remote location up to 50m.

The kit contains a transmitter (TX) and receiver (RX) unit and features an IR control system to enable to user to control the 4K/HD source from the remote location.

Ultra-Slim 4K HDMI extender over CAT6 cable. Features include 4K or 1080p resolution support up to 50m, IR control, HDMI loop out & EDID management. The receiver is PoC so the system is powered from the transmitter meaning no additional power supply is required at the TV point

DTS-HD or Dolby TrueHD audio is supported and the TX features an HDMI loop out to enable a local HDMI monitor/TV to be connected to the source directly.

HDMIE50V2 CAT6 Extender Includes HDCP2.2 support for 4k signals.

In addition, there is an EDID management system allowing the EDID of either of the external display unit(s) (EDUs) to be copied to the source for complete flexibility.

Applications include SKY Q or SKY HD, CCTV or Blu Ray players etc


HDMI 2.0, HDCP 2.2/HDCP 1.4 and DVI 1.0 compliant Supports HDCP2.2 for 4k signals and 18Gbps bandwidth Supports video resolutions up to 4k2k@60Hz RGB/Ycbcr 4:4:4/Ycbcr 4:2:2, colour sampling HDMI loop output IR Control HDR Supported EDID management Compact design for easy and flexible installation. Compatible with a range of sources such as SKY Q/HD, Blu Ray Player, CCTV etc

Antiference HDMIE50V2 extender Package Contents

HDMI2.0 Extender Transmitter HDMI2.0 Extender Receiver Wideband IR Transmitter cable Wideband IR Receiver cable 12V/1A Locking Power adaptor User Manual HDMIE50V2-Data-SheetHDMIE50V2-User-Guide  

    £163.55 inc VAT
    Reward points:0

    This item is currently out of stock. We’ll notify you when it’s back in stock if you enter your email address in the box below..