2.1mm DC plug

£1.00

If you need to connect a battery pack or wired power supply to a board that has a DC jack – this adapter will come in very handy! There is a 2.1mm DC plug on one end, and a screw terminal block on the other. The terminals are labelled with positive/negative assuming a positive-tip configuration (which is the most common)

SKU: CONNECT19B Category:

Description

2.1mm DC plug

If you need to connect a battery pack or wired power supply to a board that has a DC jack – this adapter will come in very handy!

There is a 2.1mm DC plug on one end, and a screw terminal block on the other.

The terminals are labelled with positive/negative assuming a positive-tip configuration (which is the most common)

Description of the Male DC 2.1mm Plug to Screw Terminal Block

  • Adapter with Philips Screw Terminal Block to Male DC Plug Connection
  • Material: Plastic & Nickel-plated Brass
  • Dimensions (LxWxH):38*14*12mm
  • DC Jack;
  • Size: 2.1mm
  • Gender: Male (Plug)

Uses of a Male DC 2.1mm Plug to Screw Terminal Block

  • This adapter is used to pass power to a camera from a power unit or DVR
  • It is normally used in conjunction with a balun which would be used to transfer the video picture
  • In conjunction with Cat5 Cable to provide power to a CCTV camera
  • Is widely used in the Security & CCTV Camera Industry

Advantages of a Male DC 2.1mm Plug to Screw Terminal Block

  • It is a very handy adapter to turn a CAT5 cable into a 2.1mm Male power plug
  • It is simple to install
  • They work well
  • Low-cost item
Cart
Your cart is currently empty.