Vision

Remote Control Eye

Remote Control Eye

An infrared remote control extender 'eye' intended for controlling Sky digital satellite receivers and PVRs from remote locations. It can be used alone, for a single extension room wired directly from RF OUT-2 set-top-box, I/O link-based product or in conjunction with a PROception distribution amplifier or hub in a comprehensive multi-outlet system. No infrared re-emission components are required for this RF-based system.

  • Mk 3 Infrared Remote Receiver 'eye' has 'F' connection.
  • Unique improved design 'eye' with reduced current consumption (5 mA) to ease loading on satellite receiver or distribution amplifier power supplies.
  • Wide working voltage range - operates over 5.5 - 18 V without damage.
  • Compatible with all Sky receivers on RF OUT-2 or Sky I/O Link Product*, and with all PROception distribution hubs and dual-mode amplifiers with return path facilities.
  • *For one of the new design Sky Boxes that have that they have no RF2 connection use a proLINK22(Flexible RF Output Modulator - restores Sky distribution).
  • Red LED power indicator - a useful diagnostic aid for confirming power system integrity.
  • Discreet small form-factor eye head, supplied with self-adhesive Velcro mounting pads.
  • ADDITIONAL INFORMATION
    General
    remote control eye

    Signal frequency range

    87.5 - 862 MHz (Bands II-V)

    Insertion loss

    1.5 dB

    Return path signal frequency

    7 MHz

    Signal connections

    Input 'IEC' female socket; output 'IEC' male on short flying lead

    DC power requirement

    9 V nominal at approx. 5 mA (operable over 5.5 - 18 V)
  • SPEC SHEET
  • USER MANUAL

    Turning on RF-2 Out on Sky Boxes

    Standard Sky Box (Sky, Sky+)New Sky Box (Sky+ HD)
    1. Press the SERVICES button once.
    2. Press the NUMBER 4 button - (System Setup).
    3. Press the 0 (ZERO) button, then the NUMBER 1 button, then the SELECT button - (Installer Menu).
    4. Press the NUMBER 4 button again - (RF Outlets).
    5. Press the DOWN ARROW button once - (Outlet Power Supply).
    6. Press the SIDE ARROW button once to turn the power supply to ON.
    7. Press the DOWN ARROW button once again - (Save New Settings).
    8. Press SELECT to finish the set-up.
    9. Press SKY to exit the menu.
    1. Press the SERVICES button once.
    2. Press the RIGHT ARROW button once (Settings), then press SELECT.
    3. Press the 0 (ZERO) button, then the NUMBER 1 button, then the SELECT button - (Setup).
    4. Press the RIGHT ARROW button three times - (RF Outlets).
    5. Press the DOWN ARROW button twice - (RF Outlet Power Supply).
    6. Press the SIDE ARROW button once to turn the power supply to ON.
    7. Press the GREEN BUTTON to finish the set-up.
    8. Press SKY to exit the menu.
SKU117034
£0.00
£9.99

£11.99 inc VAT
Reward points:0

This item is currently out of stock. We’ll notify you when it’s back in stock if you enter your email address in the box below..