8x8 Matrix 4K Kit

8x8 matrix

8x8 Matrix 4K Kit

Enables 4K content from 8 HDMI devices to be viewed and controlled simultaneously at 8 locations.

  • HDBaseT Matrix Switcher featuring 7 HDBaseT outputs and 1 HDMI output
  • Supports HDCP 2.2, and is backwards compatible with previous versions of HDCP and HDMI
  • Transmits 4Kx2K @ 60Hz 4:2:0 up to 26 ft. (8m) via HDMI port and 131 ft. (40m) via HDBaseT port
  • 7 HDBaseT outputs with distances up to 230 ft. (70m) at 1080p and 131 ft. (40m) at 4Kx2K on a single Cat5e/6 cable
  • HDBaseT Receivers are powered by the matrix using PoC technology
  • LED indicators show real-time switching status
  • Controllable via front panel, RS232, IR and TCP/IP
  • Built-in GUI for TCP/IP control and setup
  • Powerful EDID management
  • Support CEC to control far-end display devices via RS232 commands
  • Features Micro USB port for firmware upgrades
  • Easy installation with rack-mounting design, mounting hardware included
  • Power Supply: Matrix Unit, AC100V~ 240V; Receivers, PoC 

    4K HDBaseT Matrix

    Video Input Audio general

    Input 8 HDMI Output Signal Stereo audio

    Digital audio

    Input Connector Female HDMI Analog Audio Output Support PCM

    Input Level T.M.D.S. 2.9V~3.3V Digital Audio Output Supports PCM-Dolby-DTS-DTS-HD

    Input Impedance 100Ω (Differential) Frequency Response 20Hz~20KHz

    HDMI Standard Support 4K@60 4:2:0 & HDCP2.2

    and is backward compatible with

    all previous standards.

    Output Connector 1 L&R(RCA)

    1 SPDIF

    Video Output Control Parts

    Output 1 HDMI – 7 HDBaseT Control Ports 8 IR OUT / 1 IR ALL OUT / 7 IR IN

    1 IR EYE / 1 TCP/IP (female RJ45)

    1 RS232 (3-pin pluggable terminal block)

    Output Connector Female HDMI

    Female RJ45(with LED indicators)

    Panel Control Front panel buttons

    Output Level T.M.D.S. 2.9V~3.3V RS232 Control 3-pin pluggable terminal block

    Output Impedance 100Ω (Differential) IR Extended IR receiver

    HDMI Standard Support 4K@60 4:2:0 & HDCP1.4

    and is backward compatible with

    all previous standards.

    TCP/IP Control Web-based GUI

    Video general General

    Video Signal HDMI (or DVI-D) Power Supply AC100-240V~, 50/60Hz

    Transmission Distance 1080P@60Hz ≤70m

    4Kx2K@60Hz ≤40m

    Power Consumption 93W (Max)

    Resolution Range Up to 4Kx2K@60Hz Temperature 0~ +500

    EDID Management In-built EDID data and manual EDID


    Reference Humidity 10% ~ 90%

    Gain 0 dB Dimension (W*H*D) 436.4mm x 44.0mm x 300.0 mm

    Bandwidth 10.2Gbit/s Net weight 2900 g

    Switching Speed 200ns (Max.)

    Input & Output

    Input 1 HDBaseT

    Input Connector Female RJ45(with LED indicators)

    Output 1 HDMI

    Output Connector Female HDMI

    Control 1 IR IN / 1 IR OUT

    Control Connector 3.5mm mini jacks


    Resolution Range Up to 4K×2K@60Hz Humidity 10% ~ 90%

    Transmission Mode HDBaseT Bandwidth 10.2 Gbps

    Transmission Distance 1080P@60Hz ≤70m

    4Kx2K@60Hz ≤40m

    HDMI Standard Support HDMI1.4 and HDCP1.4

    Power Supply Powered by 4K HDBaseT Matrix


    Temperature 0~ +500


    Kit Includes

    • 1x 4K HMX871 Matrix
    • 8x Remote controls
    • 8x IR Receivers
    • 8x IR Emitters
    • 1x RS232 Cable
    • 7x HDBaseT Receivers
    • 1x Power adapter

£1,679.94 inc VAT
Reward points:0

This item is currently out of stock. We’ll notify you when it’s back in stock if you enter your email address in the box below..

You may also like