Antiference
F Type Twist-on Connector with O-ring£0.59
Labgear
Labgear VHK6
Hybrid LNB 6 output - 2 x Wideband, 4 x Quad
- HYBRID TECHNOLOGY: Keep legacy satellite running alongside the new wideband format used by Sky and other broadcasters across Europe - a Hybrid LNB containing both a Wideband and a Quad
- The industry standard has been labgear LNB’s in millions of installations – they represent the best in performance, value and practicality and we pride ourselves on providing products that are simple to install and totally reliable
- UNIVERSAL: Supplied complete with collar to fit an MK4 dish, these quality LNB’s will also fit a standard dish with 40mm collar.
- Also includes a handy built-in spirit level for easy positioning
- Finished in grey
- Supplied with a SkyTM compatible bracket
- Built-in spirit level
Works with Zone 1 or Zone 2 satellite dish, for Sky Q, Freesat,
£0.00
£39.06
Share the love with your friend
Complete the form below and we'll email your friend about this product
Be one of the first to know!
We’re sorry we’re out of stock but we can let you know as soon as it's available if you enter your email address below.
Labgear Hybrid LNB 6 output with 2 x wideband and 4 x quad refers to a device used in satellite TV installations that receives and down converts satellite signals from multiple satellites for distribution to multiple receivers.
The LNB (Low Noise Block) is the device mounted on the satellite dish that captures the satellite signal and converts it into a lower frequency signal that can be carried over coaxial cables to the receiver.
The Hybrid LNB 6 output with 2 x wideband and 4 x quad features six output ports, with two of them being wideband and four of them being quad.
The wideband outputs can receive a wide range of satellite frequencies from multiple satellites and down converting them to a lower frequency band for distribution. This means that one wideband output can provide signals for multiple satellites at once.
The quad outputs are capable of receiving four specific satellite signals each and down converting them to a lower frequency for distribution.
The hybrid LNB with multiple outputs is used in installations where multiple satellite receivers are being used. The outputs can be connected to multiple receivers or multiswitches to distribute the signals to different rooms in a building or to different receivers in a complex installation.
Additional information
Packaging Length (cm)
17
Packaging Height (cm)
8
Packaging Width (cm)
11.5
Product & Packaging Weight (grams)
327
Product Weight (grams)
279
Outputs
4x Quad, 2x Wide
Compatibility
SkyQ™ & FreeSat HD™
Input Frequencies
Low 10.7-11.7GHz High 11.7-12.75GHz
Output Frequencies
4x 950-2150MHz,
Gain Conversion @ 25⁰C
2x 290-2340MHz, 56-63dB Quad, 50-60dB Wide
Noise Figure
<1dB
Cross Polar Isolation
Typ. 20dB
Spec Sheet
