Vision 26-65" Fixed

Low profile wall brack, mounts TV just 10mm from the wall, for TVs up to 65".

The Vision V88- range of TV mounts and monitors offers a choice of fixed, tilt and fully articulated model for the professional installer. These very high quality TV mounts are built from high quality steel pressings and alloy castings finished in an electrostatic powder coat paint for a blemish free finish and durability. The range has now been extended to include universal TV and projector ceiling mounts for commercial applications. The installer can be confident of high quality, ease of installation and reliability with Vision V88- TV mounts. All models are compatible with standard TV fixing dimensions and screw sizes including VESA standards. All Vision V88- TV mounts are supplied with the necessary fixings for solid walls and a selection of screw lengths and sizes with spacers for most TV/monitor applications. The installer must check the suitability of the wall for strength. For example we do not recommend mounting a TV on a dry wall partition unless there are adequate timber studs suitable for the combined load of the TV and mount. We do not supply screws or fixings for dry wall/stud partitioning. The installer must also check the suitability of the screws and spacers to be used in the back of the TV. If the screws are too long it may be possible to damage the screen and internal components of the TV. The TV should be mounted as near as possible to the TV mount. Where a TV is curved, it may be necessary to use spacers to move the TV forward from the mount to allow for the curvature of the back of the TV